How to Replace Rear Brake Pads — 2010-2025 Toyota 4Runner

Replacing the rear brake pads on your 2010-2025 Toyota 4Runner is a crucial maintenance task to ensure safe stopping power, especially if you hear squealing, grinding, or notice reduced braking performance. This DIY repair can save you significant money, costing around $50-$80 for parts compared to $150-$250 at a shop. With the right tools and this guide, most DIYers can tackle this job confidently in a couple of hours. DIY Cost: $50-$80 | Shop Cost: $150-$250

You’re done. Clear any stored codes with your scanner and complete a normal drive cycle so the vehicle’s readiness monitors reset.

If the code returns, the root cause likely wasn’t the part you replaced — go back through the diagnostic steps before swapping anything else.